Yaskawa AC Drive Z1000 - Manual (Page 364)

2.
Place the drive and EMC noise filter in the same enclosure.
3.
Use braided shield cable for the drive and motor wiring, or run the wiring through a metal conduit.
4.
Keep wiring as short as possible. Ground the shield on both the drive side and the motor side.
A
B
D
E
C
M
U/T1
V/T2
W/T3
U
V
W
A – Drive
B – 10 m max. cable length between
drive and motor
C – Motor
D – Metal conduit
E – Ground wire should be as short as
possible.
Figure D.2 Installation Method
5.
Make sure the protective earthing conductor complies with technical standards and local safety regulations.
C B
A
A – Braided shield cable
B – Metal panel C – Cable clamp (conductive)
Figure D.3 Ground Area
D.2 European Standards
364 YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual