Yaskawa AC Drive Z1000 - Manual (Page 106)

4.1 Section Safety
DANGER
Electrical Shock Hazard
Do not connect or disconnect wiring while the power is on.
Failure to comply will result in death or serious injury.
WARNING
Electrical Shock Hazard
Do not operate equipment with covers removed.
Failure to comply could result in death or serious injury.
The diagrams in this section may include drives without covers or safety shields to illustrate details. Be sure to reinstall
covers or shields before operating the drives and run the drives according to the instructions described in this manual.
Do not remove covers or touch circuit boards while the power is on.
Failure to comply could result in death or serious injury.
Prepare a separate holding brake.
Wire the holding brake so when a fault occurs, it is activated by an external sequence and shuts the power off or triggers an
emergency switch. Failure to comply could result in death or serious injury.
4.1 Section Safety
106 YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual