Yaskawa AC Drive Z1000 User Manual
Page 267
u
Three-Phase 200 V Class Drive Models 2A0114 to 2A0396
Table A.2 Power Ratings Continued (Three-Phase 200 V Class)
Item
Specification
CIMR-Zo2A
0114
0143
0169
0211
0273
0343
0396
Maximum
Applicable
Motor
Capacity
<1>
HP
40
50
60
75
100
125
150
kW
30
37
45
55
75
90
110
Input
Input Current (A)
<2>
114
143
169
211
273
343
396
Rated Voltage
Rated Frequency
Three-phase 200 to 240 Vac 50/60 Hz
Allowable Voltage Fluctuation
-15 to 10%
Allowable Frequency Fluctuation
±5%
Minimum Power Supply Capacity (kVA)
48
60
71
88
114
143
165
Output
Rated Output Capacity (kVA)
<3>
45
57
67
84
109
137
158
Rated Output Current (A)
114
<4>
143
<4>
169
<4>
211
<4>
273
<4>
343
<5>
396
<5>
Overload Tolerance
110% of rated output current for 60 s
140% of rated output current for 0.5 s
Carrier Frequency
User adjustable between 1 and 12.5 kHz
(Maximum Frequency varies with Rated Output Capacity)
Maximum Output Voltage (V)
Three-phase 200 to 240 V (proportional to input voltage)
Maximum Output Frequency (Hz)
240 Hz
Harmonics
Reduction
DC Link Choke
Built-in
EMC
Filter (IEC/EN 61800-3 Category 2)
Built-in
External
<1> The motor capacity (HP) refers to an NEC Table 430.250 208 V motor. The rated output current of the drive output amps should be equal to or
greater than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 230 V.
<4> Carrier frequency is set to 5 kHz. Current derating is required to raise the carrier frequency.
<5> Carrier frequency is set to 2 kHz. Current derating is required to raise the carrier frequency.
A.1 Power Ratings
YASKAWA ELECTRIC TOEP C710616 45E YASKAWA AC Drive – Z1000 User Manual
267
A
Specifications