SMA SC 500HE-US Installation - Manual (Page 34)

5 Transport and Installation SMA America, LLC
34 SC500HEUS-IA-US_en-14 Installation Manual
6. Tighten the screws (A) of the right air filter.
5.5 Installing the Sunny Central
5.5.1 Removing the Kick Plates from the Sunny Central
Kick plates are located on the front and back of the Sunny Central. The position of the kick plates is
shown in the figure below.The kick plates are mounted on the cabinets of the Sunny Central with
screws.
1. Remove the screws of the kick plates on the front and on the rear of the Sunny Central using a
torx screwdriver.
Position Description
A Power Cabinet front side and rear side. 4 screws in total. 2 screws on the right and
2 screws on the left.
B Control Cabinet front side and rear side. 7 screws in total. 3 screws on the right,
1 screw in the middle, 3 screws on the left.
A
A B