SMA SC 200 - Manual (Page 40)

Parameters SMA Solar Technology AG
40 SC-BEN100262 User Manual
Change the parameters of the Sunny Central at the Sunny Central Control as described below:
1. Enter the password as described in Section 5.6 ”Enter Password” (page 27).
2. Select "Device Set-up > Parameters".
3. Press [ENTER] to select the menu in which a
parameter is to be changed.
4. Press [ENTER] to select the parameter to be
changed.
5. Make a note of the preset value of the parameter.
6. Change parameter after consultation with SMA
Solar Technology.
7. Confirm the change with [ENTER].
☑ The required parameter has been changed.
7.4 Resetting Parameters
To reset parameters, proceed as described in Section 7.3 ”Changing Parameters” (page 39), and
enter the original values of your Sunny Central.
7.5 Saving Parameters
Once parameters have been changed, save them as described below.
1. Enter the password as described in Section 5.6 ”Enter Password” (page 27).
2. Select "Device Set-up > Parameters > save
parameter".
3. Press [ENTER] twice.
☑ The parameters are now saved.