SMA SC 200 - Manual (Page 33)

SMA Solar Technology AG Measuring Channels
User Manual SC-BEN100262 33
6.4 Deleting Measurement Data
You can delete measurement data as described below:
1. Reset the measurement channels to the factory setting as described in Section 6.4 ”Deleting
Measurement Data” (page 33).
2. Select "Device Set-up > Parameters > Param.-
Function".
☑ The display blinks.
3. Select “Del. meas. data”.
☑ The display stops blinking.
4. Press [ENTER].
☑ The measurement data is now deleted.