SMA SC 200 - Manual (Page 31)

SMA Solar Technology AG Measuring Channels
User Manual SC-BEN100262 31
6.1 Adding Further Measurement Channels
You can add further channels to the standard 14 measurement channels. To do this, proceed as
follows:
1. Select "Device Set-up > Data Archives > Chan. Select. > SC...SCCXXX".
☑ The Sunny Central Control displays all
measurement channels. The measurement
channels already displayed in the menu "Long-
Term Data > Meas. Chn. > SC...SCXXX" are
marked with a dot.
2. Select the measurement channel to be added with the [ ↓ ] button and confirm with [ENTER].
☑ A dot now appears in front of the selected measurement channel.
3. When exiting the menu, confirm changes with [ENTER].
☑ Further measurement channels have been added. To call up the measurement data, follow the
steps in Section 6.3 ”Retrieving Measurement Data” (page 32).
6.2 Resetting the Display of Measurement Channels to the Factory
Setting
The Sunny Central Control displays 14 measurement channels as standard. If you have added extra
channels to the display, it is possible to reset the display back to default. To do this, proceed as
follows:
1. Select "Device Set-up > Parameters > Param.
Function".
☑ The display blinks.
2. Select "default chan.".
☑ The display stops blinking.
3. Press [ENTER].
☑ The display of the measurement channels is now reset to the factory setting.