SMA SB 2500TL-21 Installation - Manual (Page 53)

SMA Solar Technology AG Commissioning
Installation Manual SB25-30TLST-21-IA-en-13 53
7.2 Display Messages during the Start-Up Phase
• The firmware version of the internal processors
appears first in the text line.
• After five seconds, or after tapping on the display,
the serial number or the description of the inverter
and the NET ID for communication via Bluetooth
will appear. The designation of the inverter can be
changed via a communication product.
• After a further five seconds, or after a further tap,
the configured country standard is displayed
(example: "VDE-AR-N4105-MP").
• After a further five seconds, or after a further tap,
the configured language is displayed
(example: "Sprache Deutsch"
(Language German)).
• During normal operation, the text line of the display will be blank. For event messages displayed
in the text line and their meaning, refer to Section 11 "Troubleshooting" (page 64).
Illustrated display messages
The display messages illustrated in this section serve as examples and, depending on the
country setting, may differ from the actual display messages on your inverter.
Showing display messages again
If you want to view the display messages of the start phase again whilst in normal
operation, double-tap the display.
FW PACK XXXX HP XXXX
SN 2100237148 NetIDA
VDE-AR-N4105-MP
Sprache Deutsch