SMA SB 2500TL-21 Installation - Manual (Page 15)

SMA Solar Technology AG Product Description
Installation Manual SB25-30TLST-21-IA-en-13 15
4.3 Type Label
The type label uniquely identifies the inverter. The type label is located on the right-hand side of the
enclosure. You will find the following information on the type label:
• Device type (Model)
• Serial number (Serial No.)
• Date of manufacture
• Device-specific characteristics
The information on the type label is intended to help you use the inverter safely and receive targeted
customer support from the SMA Service Line. The type label must remain permanently attached to the
inverter.
Symbols on the Type Label
Symbol Description Explanation
Danger to life due to high
voltages The inverter operates at high voltages. All work
on the inverter must be carried out by skilled
persons only.
Risk of burns from hot
surfaces The inverter can get hot during operation. Avoid
contact during operation. Allow the inverter to
cool down sufficiently before carrying out any
work. Wear personal protective equipment such
as safety gloves.
Observe the
documentation. Observe all documentation that is supplied with
the inverter.
Without transformer The inverter does not have a transformer.
DC Direct current
AC Alternating current
Degree of protection: IP54 The inverter is protected against interior dust
deposits and against splash water from all
angles.
Outdoor The inverter is suitable for outdoor installation.
Proper disposal The inverter must not be disposed of together with
the household waste.
IP54