SMA POWER PLANT CONTROLLER - Manual (Page 16)

5 Mounting SMA Solar Technology AG
16 PPC-BE-P7-en-13 Operating Manual
5 Mounting
5.1 Requirements for Mounting
Requirements for the Mounting Location
☐ The mounting location must not be in a living or office area.
☐ The mounting location must not block any escape routes.
☐ The mounting location must be freely and safely accessible at all times without the necessity for any auxiliary
equipment (such as scaffolding or lifting platforms). Non-fulfillment of these criteria may restrict servicing.
☐ The mounting location and the mounting foundation must be suitable for the weight and dimensions of the
Power Plant Controller (see Section 12 "Technical Data", page 55).
☐ The ambient conditions at the mounting location must be suitable for the operation of the Power Plant Controller
(see Section 12 "Technical Data", page 55).
☐ The mounting location should not be exposed to direct solar irradiation.
☐ The Power Plant Controller with touch display must be mounted indoors.
☐ The Power Plant Controller must be mounted on a solid support surface.
:$51,1*
Danger to life due to fire or explosion if mounted at an unsuitable location
Mounting the Power Plant Controller in areas with a high fire hazard can result in fire. This can result in death or serious
injury.
• Do not mount the Power Plant Controller on flammable construction materials.
• Do not mount the Power Plant Controller in areas containing highly flammable materials.
• Do not mount the Power Plant Controller in potentially explosive atmospheres.