SMA SUNNY WEBBOX - Manual (Page 74)

Service Functions SMA Solar Technology AG / SMA America, LLC
74 SWebBox-BA-en-36 User Manual
Resetting the Sunny WebBox Using the Reset Button
From Sunny WebBox version E1 onwards, the hole for the Reset button is found on the rear panel of
the Sunny WebBox under the upper left support.
Only press the reset button when the Sunny WebBox is switched on.
1. If the Sunny WebBox is mounted on a top-hat rail, remove it from the top-hat rail.
If the Sunny WebBox is mounted directly on a wall, push the Sunny WebBox upwards slightly
and remove the it from the wall.
2. Insert a pointed object (such as a paper clip) into
the hole and press the reset button.
☑ The Sunny WebBox is reset.
11.6 Deleting Device Descriptions
1. Log into the Sunny WebBox as an installer.
2. Select "WebBox > Info" in the user interface.
3. Select [Delete device descriptions].
☑ All device descriptions are erased. When the Sunny WebBox is restarted, all device
descriptions will be detected again automatically.
Resetting specific Sunny WebBox settings.
Depending on how long you press the Reset button, the Sunny WebBox performs the
actions listed in the following table.
Time Action
1 ... 5 seconds Resets the passwords to the default setting. All other settings
(event memory, network settings, modem settings, and portal
settings) will remain intact.
5 ... 15 seconds Resets the network settings to the default setting. All other settings
(event memory, modem settings, portal settings and passwords)
will remain intact.
15 ... 30 seconds Resets all settings (event memory, network settings, modem
settings, Sunny Portal settings and passwords) of the
Sunny WebBox to the default setting. The Sunny WebBox
deletes the plant data and plant settings completely.
Over 30 seconds The Sunny WebBox is not reset. All settings remain saved.