SMA SUNNY WEBBOX - Manual (Page 26)

Commissioning SMA Solar Technology AG / SMA America, LLC
26 SWebBox-BA-en-36 User Manual
5. Select [Properties] in the "General" tab.
☑ The "Local Area Connection Properties" window
opens.
6. Mark "Internet Protocol Version 4 (TCP/IPv4)" and
select [Properties].
☑ The "Internet Protocol Version 4 (TCP/IPv4)
Properties" window opens.
7. Note the current network settings in the
"Internet Protocol Version 4 (TCP/IPv4) Properties"
window. This enables you to reset the computer
network settings after configuration of the
Sunny WebBox.
8. Enter the following static network settings for the
computer in the "Internet Protocol Version 4
(TCP/IPv4) Properties" window:
– Check the "Use the following IP address" field.
– Enter 192.168.0.100 into the "IP address:" field.
– Enter 255.255.255.0 into the "Subnet mask:"
field.
– Delete any entries in the "Default gateway",
"Preferred DNS server", and "Alternate DNS
server" fields.
9. Select [OK].
10. In the "Local Area Connection Properties" window,
select [OK].
☑ The computer is set to the network settings of the Sunny WebBox.