SMA SUNNY WEBBOX User Manual
Page 65
SMA Solar Technology AG / SMA America, LLC
Settings
User Manual
SWebBox-BA-en-36
65
10.10.2 Enabling/Disabling Active Alerting in Event of an Error
1. Integrate the Sunny WebBox in your network (see Section 29).
2. Select "WebBox > Settings > Data transmission" in the user interface.
3. Make a selection in the "Notification active" field:
4. Make a selection in the "Multiple Notices (24h/48h)" field:
5. Make a selection in the "Send error as e-mail message" field:
6. Enter your e-mail address. If the Sunny WebBox is to send notification to multiple e-mail
addresses, enter the e-mail addresses with commas as separators.
7. If you want to use your own e-mail server, select "Yes" in the "Use own mail server" field. Then
enter the following data:
– URL of the mail server (e.g. mail.gmx.net) or IP address of the mail server
– Mail server port (SMTP)
– Desired sender e-mail address for the alert e-mail
– User name and password for your e-mail account
8. Click [testing].
☑ The Sunny WebBox sends a test e-mail to the specified e-mail address. If you do not receive
the test e-mail, check the spam folder of your e-mail inbox and the local network settings (see
9. Select [Save].
☑ Notification in case of error is activated.
"Yes"
Notification is active. Adjust further settings.
"No"
Notification is not active. Select [Save].
"Yes"
The Sunny WebBox will send you an SMS when an error event occurs.
If the error persists after 24 hours and after 48 hours, the Sunny WebBox will
notify you again in each case.
"No"
The Sunny WebBox will notify you once when an error event occurs.
"Yes"
The Sunny WebBox informs you via e-mail when an error type event occurs.
The input field for the e-mail address appears. Continue with step 6.
"No"
Notification by e-mail is deactivated. Continue with step 8.