6 configuring sunny webbox for the local network, 2 using dynamic network settings (dhcp), Configuring sunny webbox for the local network – SMA SUNNY WEBBOX User Manual
Page 29: Using dynamic network settings (dhcp), Ge 29)

SMA Solar Technology AG / SMA America, LLC
Commissioning
User Manual
SWebBox-BA-en-36
29
6.6 Configuring Sunny WebBox for the Local Network
6.6.1 Information on the Network Configuration of the 
Sunny WebBox
You have the following options for integrating the Sunny WebBox into the local network:
• Dynamic network settings (DHCP)
• Static network settings
6.6.2 Using Dynamic Network Settings (DHCP)
When using DHCP (Dynamic Host Configuration Protocol), the Sunny WebBox obtains its network 
settings (IP address, subnet mask, gateway and DNS server) via a DHCP server. 
1. Select "WebBox > Settings > Network" in the user interface.
2. In the "Obtain IP address" field select "Dynamic (DHCP)".
3. Select [Save] and [Confirm].
☑ DHCP is activated in the Sunny WebBox. You may now connect the Sunny WebBox to the local
network. Tip: You can find the current network settings for the Sunny WebBox on the user 
interface under "WebBox > Settings > Network" in the column under the selection field 
"Dynamic (DHCP)".
Changing network settings
Do not change any network settings in the network devices if you are not clear about the 
effects of the change. Changes to values could lead to the existing network not functioning 
or only partially functioning. If you have any questions, contact your network administrator.
Default settings
DHCP is activated in the Sunny WebBox by default.
DHCP server requirements
If you want to obtain the network settings for the Sunny WebBox via DHCP, check your 
DHCP server in advance. The DHCP server must extend the lease of the assigned IP 
address. If the DHCP server assigns a new IP address after the lease has expired, we do 
not recommend using DHCP.
You can only call up the user interface via the URL http://WebBox“serial number“ if 
your DHCP server has a DNS function.
If your DHCP server does not have a DNS function but you want to use DHCP, you can 
call up the user interface via the current IP address of the Sunny WebBox. You can 
determine the current IP address via the SD card (see page 82). Alternatively, you can find 
the Sunny WebBox IP address in the DHCP server. DHCP servers can normally list all 
devices to which you have assigned an IP address. You can then identify the Sunny 
WebBox based on your MAC address. The MAC address of your Sunny WebBox is 
located on the type label and the "WebBox > Info" page.
