SMA SUNNY WEBBOX - Manual (Page 72)

Service Functions SMA Solar Technology AG / SMA America, LLC
72 SWebBox-BA-en-36 User Manual
11.4 Stopping the Sunny WebBox
You can stop the Sunny WebBox in one of the following ways:
• Stop the Sunny WebBox via the user interface
• Stop the Sunny WebBox by removing the plug-in power supply from the socket-outlet
Stopping the Sunny WebBox Via the User Interface
1. Log into the Sunny WebBox as an installer.
2. Select "WebBox > Info" in the user interface.
3. Select [Stop system].
☑ A window containing a security question opens.
4. Select [Confirm].
☑ The Sunny WebBox quits all programmes and switches the web server off.
5. If the "POWER" LED is green and all other LEDs are red, disconnect the plug-in power supply
from the socket-outlet.
☑ The Sunny WebBox has been stopped.
Stopping the Sunny WebBox by Removing the Plug-in Power Supply from the
Socket-outlet
1. Remove the plug-in power supply from the socket-outlet.
☑ The Sunny WebBox has been stopped.
11.5 Resetting the Sunny WebBox
During resetting, specific Sunny WebBox settings are reset to the default setting. If you only wish
to restart the Sunny WebBox without resetting the settings, see Section 11.4 "Stopping the Sunny
WebBox" (page 72).
You can reset the Sunny WebBox in the following ways and to various degrees:
• Reset the Sunny WebBox via the user interface
• Reset the Sunny WebBox using the reset button
Loss of data when disconnecting the Sunny WebBox from the electricity grid
Do not remove the Sunny WebBox plug-in power supply from the socket-outlet if the
"MEMORY" LED light is flashing orange.
Data backup
Before you reset the Sunny WebBox, take note of all settings such as network or portal
settings, if necessary. In addition, back up the PV plant data in order to avoid data loss.