HEIDENHAIN iTNC 530 (340 420) - Manual (Page 508)

480 13 Tables and Overviews
13.1 Gener
a
l User P
a
ra
met
e
rs
Disable datum setting MP7295
Do not disable datum setting: +0
Disable datum setting in the X axis: +1
Disable datum setting in the Y axis: +2
Disable datum setting in the Z axis: +4
Disable datum setting in the IVth axis: +8
Disable datum setting in the Vth axis: +16
Disable datum setting in the 6th axis: +32
Disable datum setting in the 7th axis: +64
Disable datum setting in the 8th axis: +128
Disable datum setting in the 9th axis: +256
Disable datum setting
with the orange axis
keys MP7296
Do not disable datum setting: 0
Disable datum setting with the orange axis keys: 1
Reset status display, Q
parameters, machining
time and tool data MP7300
Reset all when a program is selected: 0
Reset all when a program is selected and with M02, M30, END PGM: 1
Reset only status display and tool data when a program is selected: 2
Reset only status display, machining time and tool data when a program is selected and with
M02, M30, END PGM: 3
Reset status display, machining time and Q parameters when a program is selected: 4
Reset status display, machining time, and Q parameters when a program is selected and with
M02, M30, END PGM: 5
Reset status display and machining time when a program is selected: 6
Reset status display and machining time when a program is selected and with M02, M30, END
PGM: 7
TNC displays, TNC editor