HEIDENHAIN iTNC 530 (340 420) - Manual (Page 136)

108 5 Programming: Tools
5.2 T
ool D
a
ta
Leaving the tool table
U U U U Call the file manager and select a file of a different type, such as a
part program.
Additional notes on tool tables
Machine parameter 7266.x defines which data can be entered in the
tool table and in what sequence the data is displayed.
Insert a line for the indexed tool number after the
active line. The function is only active if you are
permitted to store various compensation data for
a tool (machine parameter 7262 not equal to 0).
The TNC inserts a copy of the tool data after the
last available index and increases the index by 1.
Application: e.g. stepped drill with more than one
length compensation value.
Delete current line (tool)
Display / Do not display pocket numbers
Display all tools / only those tools that are stored
in the pocket table
You can overwrite individual columns or lines of a tool
table with the contents of another file. Prerequisites:
n The target file must exist.
n
The file to be copied must contain only the columns (or
lines) you want to replace.
To copy individual columns or lines, press the REPLACE
FIELDS soft key(see “Copying a single file” on page 53).
Editing functions for tool tables Soft key