HEIDENHAIN TNC 310 (286 140) - Manual (Page 199)

187 HEIDENHAIN TNC 310
1
1
.1 Gr
aphics
Plan view
ú Press the soft key for plan view.
The deeper the surface, the darker the shade.
Plan view is the fastest of the three graphic display
modes.
Projection in 3 planes
Similar to a workpiece drawing, the part is displayed with a plan
view and two sectional planes. A symbol to the lower left indicates
whether the display is in first angle or third angle projection
according to ISO 6433 (selected with MP7310).
In addition, you can shift the sectional planes with the
corresponding soft keys:
ú Press the soft key for projection in three planes.
ú Shift the soft-key row until the TNC displays the
following soft keys:
Function Soft keys
Shift the vertical sectional plane
to the left or to the right
Shift the horizontal sectional plane
upwards or downwards
The positions of the sectional planes are visible during shifting.