Grass Valley SMS-6000 Series - Manual (Page 98)

4-6
Section 4 — Control Panels
SMS–C16BPS Control Panel
The SMS–C16 Button-Per -Source Control Panel is illustrated in Figure 4-2.
Figure 4-2. SMS–C16BPS Control Panel
Description
This panel has 17 buttons, 16 are used to select the sources (inputs) and one
button is used as a Lock/Enable function. There are no breakaways on this
panel. Refer to Section 3: Configuration Editor of this manual for details
of how to set up the Lock and Enable modes.
Designation Strip
A slide-in designation strip may be used to label sources with
easy-to-remember names above the buttons.
Operation
The destination and the levels controlled by this panel are determined by
the setup of the system and can be changed using the SMS-6000
Configuration Editor, if supplied.
Sources
Press the required source button to select a new source.
Chop
If two source buttons are held down then the output switches rapidly
between the two inputs.
NOTE: The chop affects all levels the panel has been configured to control
This feature is useful for engineering checks and system alignment of gains
and phasing.
Series 6000 Grass Valley
3529-01