Grass Valley SMS-6000 Series User Manual
Page 73
3-10
Copyright © Tektronix, Inc., Grass Valley Products
159398-00 Software Ver1.0
Section 3 — SMS-6000 Configuration Editor
Figure 3-7. Partial Frames and Custom Multi-Xpts Frames Windows
6. Select
VMTX
to access the Virtual Matrix Actions window.
7. Configure
[see page 3-5 (blocks of crosspoints within
a Frame)] for all Frames that are either Partial Frame (contain more
than one Level) or Custom Multi-Xpt [contain more than one block of
crosspoints expected to switch on the same Level (e.g., R and G might
be in a single Frame)].
a. Select
NEW
to access New Virtual Matrix window.
b. Select
FRAME
.
c. Enter Name.
d. If selected frame is a
SPLIT
FRAME?
You will need to assign Inputs and Outputs in the fields.
NOTES:
A Serial Video Frame will need to have its Virtual Matrix edited for
signal type.
A Stereo Analog Audio Frame is configured as a single Virtual Matrix.
e. If selected Frame is a Serial Digital Frame you will need to select
Signal Type.
f.
Select
OK
to return to Virtual Matrix Actions window.
8. Select
DEFAULT NEW
to create one
Frame that still does not have a Virtual Matrix.
9. Select
CLOSE
to return to the SMS-6000 Configuration Editor window.