Grass Valley SMS-6000 Series - Manual (Page 66)

159398-00 Software Ver1.0 Copyright © Tektronix, Inc., Grass Valley Products 3-3
Configuring the SMS-6000 Router
Configuring the SMS-6000 Router
To configure or reconfigure your SMS6000 Router, you will:
1. Create a new configuration, or open and/or copy an existing one (see
page 3-3).
2. Create (or change, if desired) the configuration items (see page 3-4) in
this order:
Frames
Virtual Matrices
Levels
Sources and Destinations
Panels
3. Save the configuration (see page 3-23) to disk, if desired.
4. Download the configuration to your SMS6000 Router (see page 3-24).
Examples
The configuration for every system is unique to that system; therefore,
your configuration will be unique. To aid in configuring a system, we will
use examples of possible configurations.
Create a New Configuration, or Open and/or Copy an Existing One
■
To create a new configuration, click on FILE , then NEW .
■ To Open an existing configuration, click on FILE , then OPEN .
■
To Copy an existing configuration (without destroying the original),
open the configuration, then click on
FILE , then SAVE AS , and give it a
new name.
Figure 3-2. File, Open, and Save As Windows