Grass Valley SMS-6000 Series - Manual (Page 53)

2-8
Section 2 — Installation
Remote Control
RS232/422 Computer Port
The connectors (9-pin D-type sockets) for the computer ports are fitted on
the rear of each frame. some Most units have just one connector, but the
3RU video and serial frames have four connectors of which only one, Serial
4
port, is supported at present.
Joystick Override
Joystick or camera microswitch override is provided as a standard feature
on most control panels and is accessed on the PARALLEL port. For the
correct pinouts for the Joystick Override refer to Table 2-4.
NOTE: The mating connector is a 9-pin D-type socket, use a tin and dimple type
with a grounded metal shell to prevent RFI emission from the equipment.
By default the eight cameras are assigned to be the first eight inputs of the
matrix, but it is possible for them to be mapped to any input using the SMS-
6000 Configuration Editor.
Table 2-4. Joystick Override Pinouts
Input Pins Signal
1 Camera 1
2 Camera 2
3 Camera 3
4 Camera 4
5 Camera 5
6 Camera 6
7 Camera 7
8 Camera 8
9 GND