Grass Valley SMS-6000 Series - Manual (Page 76)

159398-00 Software Ver1.0 Copyright © Tektronix, Inc., Grass Valley Products 3-13
Configuring the SMS-6000 Router
NOTE: The first free Input or Output is assigned as a default if you choose to skip
this step.
You can create up to 80 Sources and 80 Destinations.
Data Matrix Frames require that the 80th source be unconfigured. This 80th
Source will become the IDLE Source. This does not affect the configuration of the
other 79 Sources.
6. Click on OK to return to the New/Edit window.
7. Click on OK to create this Source or Destination and return to the
Actions window.
8. Click on COPY to increment the inputs/outputs for creating the next
source/destination of this group.
9. Repeat steps 3 to 9 until the group is complete.
10. Repeat steps 2 to 9 for the next group.
If you used Default New to create your Sources/Destinations and only want to change
the name of a group:
11. Highlight all the default entries of the group except for the first entry.
12. Select DELETE to remove the entries.
13. Highlight the remaining Source/Destination of the group in the
Actions window.
14. Select EDIT .
15. Change the Name.
16. Click on OK to return to Actions window.
17. Click on COPY to increment the inputs/outputs for creating the next
source/destination of this group.
18. Click on CLOSE to return to SMS-6000 Configuration Editor window,
when finished configuring all Sources/Destinations.
IMPORTANT!
It is very important that the configuration of all Frames , Virtual Matrices ,
Levels , Sources , and Destinations (including all names) is completed before
Control Panels are configured