Grass Valley SMS-6000 Series - Manual (Page 75)

3-12 Copyright © Tektronix, Inc., Grass Valley Products 159398-00 Software Ver1.0
Section 3 — SMS-6000 Configuration Editor
Figure 3-9. Partial Frame and Custom Multi-Xpt Levels Windows
Sources and Destinations
The configuration process is the same for both Sources and Destinations. The only
variation is that Inputs are assigned to Sources and Outputs are assigned to
Destinations.
1. Select SOURCE or DEST to access the Source Actions or Destination Actions
window.
For each group of Sources or Destinations:
2. Select NEW .
3. Create one Source or Destination, named xxx1, where xxx is the name of the
group.
Remember the 6 character limit (see page 3-4)—if you will have 10 or more
Sources or Destinations in the group, the group name should be 4 characters or
less.
4. Select the Level/s you want for this Source or Destination.
5. To assign Inputs or Outputs:
a. Select SET/VIEW INPUTS or SET/VIEW OUTPUTS.
b. Enter the physical connector number(s).