Grass Valley K2 Dyno S v.3.0 - Manual (Page 8)

Safety Summaries
K2 Dyno S Replay Controller 8 Installation & Service Manual
4 December 2012
Warnings
The following warning statements identify conditions or practices that can result in
personal injury or loss of life.
Dangerous voltage or current may be present — Disconnect power and remove battery (if
applicable) before removing protective panels, soldering, or replacing components.
Do not service alone — Do not internally service this product unless another person capable
of rendering first aid and resuscitation is present.
Remove jewelry — Prior to servicing, remove jewelry such as rings, watches, and other
metallic objects.
Avoid exposed circuitry — Do not touch exposed connections, components or circuitry
when power is present.
Use proper power cord — Use only the power cord supplied or specified for this product.
Ground product — Connect the grounding conductor of the power cord to earth ground.
Operate only with covers and enclosure panels in place — Do not operate this product when
covers or enclosure panels are removed.
Use correct fuse — Use only the fuse type and rating specified for this product.
Use only in dry environment — Do not operate in wet or damp conditions.
Use only in non-explosive environment — Do not operate this product in an explosive
atmosphere.
High leakage current may be present — Earth connection of product is essential before
connecting power.
Dual power supplies may be present — Be certain to plug each power supply cord into a
separate branch circuit employing a separate service ground. Disconnect both power supply
cords prior to servicing.
Double pole neutral fusing — Disconnect mains power prior to servicing.
Use proper lift points — Do not use door latches to lift or move equipment.
Avoid mechanical hazards — Allow all rotating devices to come to a stop before servicing.
Cautions
The following caution statements identify conditions or practices that can result in damage
to equipment or other property
Identifies a protective grounding terminal which must be connected to earth
ground prior to making any other equipment connections.
Identifies an external protective grounding terminal which may be connected to
earth ground as a supplement to an internal grounding terminal.
Indicates that static sensitive components are present which may be damaged by
electrostatic discharge. Use anti-static procedures, equipment and surfaces
during servicing.