Grass Valley K2 Dyno S v.3.0 - Manual (Page 33)

Chapter 2 Dyno S Controller Installation Monitor K2 system video channels
K2 Dyno S Replay Controller 33 Installation & Service Manual
4 December 2012
4. Click Channel , select the C1 tab, ensure the Player/Recorder type is selected, and then
scroll down and make video and audio settings as appropriate for your input and
output.
5. Repeat the above step for tabs C2, C3, and C4 so that all four channels are set to
Player/Recorder with appropriate settings.
6. Click OK to exit the Configuration menu.
Selecting which channels will be used for recording and playback is accomplished when a
Dyno session is created.
If using ChannelFlex™ features, refer to the K2 AppCenter User Manual.
Monitor K2 system video channels
Record and playback video can be viewed on the K2 Summit computer monitor, or can be
viewed using external video monitors.
K2 system computer display monitoring
On the VGA monitor connected to the K2 Summit Client, you can monitor four video
channels. This requires an AppCenter Pro or Elite license. Switching between views can be
accomplished in two ways.