Grass Valley K2 Dyno S v.3.0 - Manual (Page 53)

Chapter 4 Dyno S Controller FRUs Close chassis
K2 Dyno S Replay Controller 53 Installation & Service Manual
4 December 2012
Close chassis
When replacing the top, install the two center top (A) and two center side (B) screws first,
and then replace the remaining screws in any order.
Fan removal
1. Open chassis so the top is upside-down on the padded work surface (see “Open chassis”
on page 51 ).
WARNING: To avoid serious injury from high currents, turn off the K2 Dyno S
Replay Controller and disconnect AC power before opening the top cover
or removing any internal parts.
8702_04
A
A
B
B