Grass Valley K2 Dyno S v.3.0 - Manual (Page 23)

Chapter 1 Product description Dyno S Controller and K2 Solo Media Server System
K2 Dyno S Replay Controller 23 Installation & Service Manual
4 December 2012
Dyno S Controller and K2 Solo Media Server System
A Dyno S Controller can also operate with the smaller K2 Solo Server. A typical
configuration has one channel input and one channel output.
K2 Summit/Solo system requirements
To support connection to a K2 Dyno S Replay Controller, your K2 Summit Production
Client or K2 Solo Media Server must meet requirements as follows. Refer to compatibility
information in release notes for complete and updated requirements.
• K2 Summit Production Client with internal storage, direct-connect storage, or shared
K2 SAN storage.
• All K2 Summit systems controlled by a Dyno S Controller on a K2 SAN must have
their timecode synchronized to house timecode
• Depending on media formats required, a K2 Summit Production Client must have
appropriate licenses and/or hardware installed.
• The version of K2 system software must be compatible with the version of Dyno S
Controller software. Refer to release notes.
• AppCenter Pro license is required. On K2 Solo Media Server, the license is standard.
On K2 Summit Production Client, the license must be installed, if not already present.
• If using ChannelFlex Suite features, the K2 Summit Production Client or K2 Solo
Media Server requirements are as follows:
• Compatible K2 system software
• AppCenter Elite license
• Super Slo-Mo also requires the HD license
K2 Solo
K2 Dyno S Replay Controller
Ethernet
connection
Video/audio
monitoring
SDI in
C1
SDI out
C2
Record Play
AppCenter Pro
on K2 Summit
Production Client
K2 Dyno S Replay
application
computer output