Grass Valley K2 Dyno S v.3.0 - Manual (Page 28)

Chapter 2 Dyno S Controller Installation Gather additional items
K2 Dyno S Replay Controller 28 Installation & Service Manual
4 December 2012
Gather additional items
To complete a typical K2 Dyno S Replay System, as referenced in this Quick Start Guide,
you must provide the following items:
• Two computer monitors (1280 x 1024 x 32 or greater) and cables. The Summit has a
VGA connector, and the Dyno has DisplayPort connectors.
• Ethernet cables, either crossover or straight-through.
• USB keyboard and mouse, for use with Summit.
• Video monitors and cables, or if equipped with the App Center Pro license the Summit
computer monitor can be used to monitor video in and out.
• Audio monitoring (headphones or speakers).
System cabling
Cable Dyno S Controller
Make Dyno S Controller cable connections as illustrated.
The Ethernet connection between the K2 Summit Client and the Dyno S Controller can be
via direct connect cable or via an Ethernet switch.
Power Cord
Power
Standby
Ethernet
(control)
Keyboard
Mouse
8681_02
Stereo
Audio Out
(1/8 in.)
DisplayPort
(use adapter if connecting
to a DVI or VGA monitor)