Grass Valley K2 Dyno S v.3.0 - Manual (Page 25)

Chapter 1 Product description Dyno S Controller general specifications
K2 Dyno S Replay Controller 25 Installation & Service Manual
4 December 2012
Dyno S Controller general specifications
Characteristic Specification
Power 100 - 240 VAC, 50 - 60 Hz, and 2.5A
Dimensions Dimensions: length = 15.1 in. (383 mm);
width = 10.0 in. (254 mm); height = 6.4 in.(64 mm) (All approx.)
Weight 4.75 kg (10.5 lbs.)
Temperature range Operating: 0°C to 40°C (32°F to 104°F); Storage: -20°C to 60°C
(-4°F to 140°F)
Humidity range 10% to 90% (relative humidity)
Fuse (internal) 1.1A 20V Self Resetting - This fuse is mounted on the CPU
Carrier board, on the 12V rail, and is intended to prevent over
current to the LCD Panel. While this fuse is installed, it is not
used with the currently approved LCD panel on the K2 Dyno S.