7 intercom routing, Intercom routing, Outgoing: incoming – Grass Valley DMC 1000 v.12.4 User Manual
Page 92
92
DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 6 - Audio setup
–
For SOURCE4, select Sidetone (Sidetone channel from the cameraman mic)
3.
Tap each LEVEL buttons and set the desired channel mix contribution. The default value
for all channels is 50, which means that all channels are equally loud.
Set up the monitoring section to listen to the intercom channels:
1.
Go to the AUDIO
>
MONITORING
menu.
2.
Tap the HDPH
MODE
LEFT
button and select Source,
3.
Tap the HDPH
SOURCE
LEFT
button and select Mixer,
4.
Do the same for the headphone right settings.
Both headphone muffs now produce the mixed intercom channels. This is the most common
use of the intercom function. You can also use one headphone channel to listen to any
intercom channel or the pre-defined mix, while on the other headphone channel is used for
recording or live monitoring.
6.7.7 Intercom routing
The following schematic overview provides a survey of the intercom routing:
Src
Src
Eng
Src1
Alias
Prod
Src2
Alias
Prog
Src3
Alias
Sidetone
Lvl1
Lvl2
Lvl3
Lvl4
Src4
Alias
Eng_Ret
Prod_Ret
Prod Talk
Eng Talk
Output
Mixer
To headset cameraman
Output
Talk back to base unit
Talk back to base unit
Alias
Alias
Mixer
SDI In3
SDI In4
SDI In1
MicRear
Sidetone
Sidetone
Outgoing:
Incoming: