Grass Valley DMC 1000 v.12.4 - Manual (Page 136)

136 DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 12 - Side panel menu
12.3 Setup menu
Menu item Values Description Level File
formats
video standard 1080i59, 720p59,
1080i50, 720p50, 576i50,
480i59, (1080p2398,
1080p25, 1080p2997) Selects camera video standard.
Note: 1080p standards are only available with
the 1080p option.
2 Prod
video compr. SD DV25, [D10 30, D10 40,
D10 50], JP2K30,
JP2K40, JP2K50,
[MP2I30, MP2I40,
MP2I50, MP2LG] Selects video compression and bitrate for SD
recording.
Note: MPEG-2 and D10 compression are only
available with the MPEG2 option board.
2 Prod
media selection REV, CF1, CF2, Extern Selects the storage media for recording
multimedia data. 0 Prod
VF playback Conf, Full Sets the way content is displayed in the
viewfinder:
Conf = as is (‘confidence’);
Full = maximized cropping. 2 Prod
video source CAM, SDI, CVBS Selects video (recording) source:
CAM = camera live video;
SDI = digital video input;
CVBS = analog video input (only available
when an SD video standard is selected) 2 Prod
video compr. HD JP2K50, JP2K75,
JP2K100, [MP2I60,
MP2I80, MP2LG25,
MP2LG35, MP2LG50] Selects video compression and bitrate for HD
recording.
Note: MPEG-2 selections are only available
with the MPEG-2 option board.
2 Prod
chunk size NoLimit, [10 sec], 30 sec,
60 sec, 2 GByte Sets the chunk size for the mediafile.
Note NoLimit is not available when CF1 or
CF2 is selected.
Note: 10 sec is not available for bitrates of 75
Mbp/s or higher. 2 Prod
aspect ratio 16:9, 4:3, LB Sets aspect ratio of the recorded signal (only
available when an SD video standard is
selected) 2 Prod
timecode
run mode Record-run, Free-run Sets the run mode of the timecode generator:
Record-run = timecode generator only runs
when recording.
Free-run = timecode generator runs
continuously. 3 Prod
userbits
userbit mode Usr value, Date, Ext input Selects the timecode user bits mode. 3 Prod
userbits 1
UB1..4 0..F (0) Sets a value for user bit 1 to 4 3 Prod
userbit type Date/Time, Page/Line,
Unspec. Selects the timecode user bits type. 3 Prod
userbits 2
UB5..8 0..F (0) Sets a value for user bit 5 to 8 3 Prod
setup