Grass Valley DMC 1000 v.12.4 - Manual (Page 29)

DMC 1000 Digital Media Camcorder User’s Guide (v4.0) 29
Chapter 2 - Attaching parts
2.4 Attaching a battery
For more details on using your specific battery, refer to the battery manufacturer’s
documentation.
To attach a battery to the battery plate proceed as follows:
1. Insert the studs of the battery into the corresponding keyhole slots located at the back
of the plate.
2. Slide the battery sideways (to the right, as shown below) until it clicks into place.
3. To remove the battery, press down the locking lever and unclip the battery by sliding it
to the left.
☞
Note
☞
Note
Different plates are optionally available for different battery types.
1 2