Grass Valley DMC 1000 v.12.4 - Manual (Page 118)

118 DMC 1000 Digital Media Camcorder User’s Guide (v4.0)
Chapter 11 - Specifications
11.2.5 Headphones output
11.2.6 Headset microphone input (MicRear)
11.2.7 Power input connector (DC in)
☞
Note
☞
Note
Power input (pin 4) accepts a voltage from 11.0 to 17.0 VDC maximum.
11.2.8 Accessory output connector
Pin Description
sleeve Ground (cable shield)
tip Audio Left
ring Audio Right
Headphones impedance: 200 Ω
Max. output level: +22 dBu
sleeve
ring
tip
6.3 mm stereo jack
(cable plug shown)
Pin Description
sleeve Ground (cable shield)
tip Signal hot (+)
ring signal cold (-)
Microphone impedance: 200
Ω
Max. input level: +14 dBu
Phantom power: +5 .. +7 V (fixed)
NOTE: for unbalanced operation the
ring and sleeve should be internally
bridged.
sleeve
ring
tip
3.5 mm mini stereo jack
(cable plug shown)
3
2
4
1
Pin Description
1 Ground
2 not connected
3 Ground (bridged to pin 1)
4 +15 VDC (nom.) XLR 4-pin male
(panel view)
Pin Description
1 Ground
2 Tally/on-air
3 Ground (bridged to pin 1)
4 +12 VDC nom. (max. 1.0 A) Hirose 4-pin female
(panel view)
3
2
4
1
NOTE: power output (pin 4) follows
the applied power input (DC in).