Grass Valley DMC 1000 v.12.4 - Manual (Page 11)

DMC 1000 Digital Media Camcorder User’s Guide (v4.0) 11
Attention
About the Xensium imager
• The Xensium imager used in the Infinity camcorder is equipped with an electronic rolling
shutter. When shooting under (artificial) low-frequent fluorescent lighting conditions the
image may be affected by intensity variations.
About the side panel display
• The camcorder’s side panel display is a TFT display that is manufactured using high
precision technology that yields a quality of 99.99% or higher. However, it is possible that
one or more pixels may constantly display a single color or be permanently off. This does
not indicate a defective display and your recorded data is not affected.
• Exposing the display to direct sunlight or very bright light sources for extended periods
may damage the unit. It is recommended that you close the display with the screen facing
the camcorder body when not using it.
About REV PRO disks
• When a REV PRO disk is not in use, always store it in its protective case.
• Avoid handling the disk by the front edge (the edge that inserts into the drive).
• If you suspect a disk is defective, replace it immediately. Do not continue to use it as this
could damage the drive.
• If a disk is difficult to insert, make sure that the logo is facing away from the camcorder
and try again. Never force a disk into or out of the REV PRO drive; this could damage the
drive and the disk.
• Avoid exposing REV PRO disks to direct sunlight, extreme temperatures or moisture.
• Avoid exposing REV PRO disks to strong magnetic fields such as those produced by
monitors or speakers.
• Avoid dropping a REV PRO disk. This could cause damage to the disk.