Grass Valley DD10 part 1 - Manual (Page 95)

2.11 Masks Panel Diamond digital DD10
89
Creating a wipe mask
Pattn 1, Pattn 2 Using Pattn 1 or Pattn 2, one of the wipe generators can be selected for masking.
The wipe pattern can be directly selected with the wipe selection keys on the Wipe
panel. The size of the wipe pattern can be adjusted with the SIZE control on the
Wipe panel.
S I Z E
The wipe mask can be positioned with the trackball on the Positioner panel. For this
purpose, previously activate Pos on the Wipe panel.
The wipe mask can be optionally positioned in the picture.
Further details about wipe pattern control are contained in the section Wipe Panel.
Note: Please note that the wipe generators can be used at the same time for
different applications which may interact with one another.
Mask store Mask store selects the mask store as a mask source. The auto delegation system
automatically switches over the Stores panel to mask store control.
Further details about store control and PaintModeMasking are contained in the
section Stores Panel.
Forc FGND Pressing the assiciated function key permits to select whether the mask suppres-
ses (masked) or forces the foreground picture. When the key lights, forced fore-
ground is activated.
Mask inv Mask inv inverts the mask signal.
With a square mask, for instance, the contents of the square is not used any more
for masking but the outer field of the square.
Mask PVW Pressing the associated function key highlights the mask signal on the preview
monitor.
The function serves the adjustment of the mask.
Note: In the Mask PVW mode, the mask is only represented as 1-bit signal. If
you want to exactly position a mask with softness, switch on the mask
with the Mask on key on the Keyers panel.