Grass Valley DD10 part 1 - Manual (Page 77)

2.10 Wipe Panel Diamond digital DD10
71
2.10.1 WIPE SELECTION CODE FOR CONTROL PANEL AND EDITOR OPERATION
The enclosed list contains all wipe patterns available in the switcher together with
their specific wipe number (in line with SMPTE). The table also indicates which
modifiers are possible with the individual wipe patterns.
All wipe patterns that cannot be directly selected with the wipe selection keypad
may be recalled with a register selection in the EXTRA panel.
The register number to be selected is the listed SMPTE wipe number plus 200.
Example: Selection of wipe no 138 (= register 338)
"
No EXTRA function selected.
" Enter register no. 338.
"
Press Enter.
"
Wipe pattern is recalled.
"
The wipe pattern may subsequently be stored as a user wipe and
is thus directly available by simple key actuation.
Note: For DD5 switchers only the basic pattern can be used!