Grass Valley DD10 part 1 - Manual (Page 70)

2.10 Wipe Panel Diamond digital DD10
64
Pattern selection The pattern selection panel enables direct selection of 15 wipe patterns. These pat-
terns are shown in the upper part of the selection key.
15 more patterns can be selected with the 2nd key. These patterns are shown in
the lower part of the selection key.
Further patterns can be selected by actuating the Rotation/User key. In this mode,
rotation wipes are available in addition to the standard wipe patterns.
The insertable legend plates of the keys show the possible rotation wipes by indi-
cating the center of rotation and the wipe direction.
RANDOM
USER 1
RWD
USER 2
REV
USER 3
STOP
USER 4
Play
USER 5
FFWD
User-defined wipe patterns (User 1...5)
Beside the standard patterns, the Diamond digital DD10 offers the possibility of
preparing and storing user-defined patterns. A simple stroke of User 1...5 also se-
lects these patterns directly.
Preadjustment:
•
Adjustment of the desired pattern with all its modifications.
•
Hold down Rot/User.
•
Select the desired storage location by pressing one of the User 1...5 keys.
•
Storage is indicated by a short lighting-up of the corresponding User key.