Grass Valley DD10 part 1 - Manual (Page 152)

3.5 Install menu Diamond digital DD10
146
Press the associated function key to exchange the position of the Program and Pre-
set banks.
In inactive status the Program or Background bank is above the Preset bank as is
international custom.
In active status the Program or Background bank is below the Preset bank as is
general practice in German TV broadcasting corporations.
If you press the associated function key, all bar graphs of the menus will include
a percentage value indicating the current analog value. This indication only serves
as a general guideline and does not show e.g. exact levels.
LOWLI
LOWLI
50%
inactive active
When ON, the on air indicators on the panel signal on air if the respective bus is
on air OR a coupled (internal) AUX–BUS is on air.
When OFF, the on air indicators on the panel signal on air if theonly the respective
bus is on air.
Press the associated function key to select the AUTO MENU function. In active sta-
tus the associated menu will be called automatically whenever a key is selected in
the various control panels of the desk. The automatic selection is always disabled
when the EXTRA menu is selected.
In inactive status the individual menus can be selected with the associated keys
if necessary.
As from software version”F”, when analogue values are changed, a window can
be displayed in the selected menu which shows the various settings in a bar graph.
This mode can be enabled or disabled by pressing the softkey AUTO BAR.
For DD5 and DD10 switchers, click on an EXIT panel on the menu monitor using
the mouse or the trackball to switch off the window.
PGM/PST
GERMAN
SELECT
%–BARS
OR’D
AUX
AUTO
MENU
AUTO
BAR