Grass Valley DD10 part 1 - Manual (Page 17)

2.3 DVE Panel Diamond digital DD10
11
2.3 DVE PANEL
The DVE mode enables switching the following signals to an external DVE:
•
all signals of the AUX bus
•
video signals and – if available – the associated key signal from the respective
mixing stage.
Preset
Loop
BGD
DVE
Key Key
1 2
If Loop is not actuated, the respectively selected video signal is switched through
to the DVE. The manipulated signal of the DVE is available on the input routing
switcher and can be processed in the same way as a normal video signal.
If Loop is actuated, the respective video and key signal is switched to the DVE. The
manipulated signals of the DVE are fed back to the ME at that place where also the
non-manipulated signals are switched to. The DVE is looped into the signal or key
path.
PGM and Preset determine in case of a background DVE transition on the Transi-
tion panel whether the new picture appears with the DVE (preset) or the former pic-
ture disappears with the DVE (PGM).
When switching the DVE transition on the Transition panel, the functions on the
DVE panel are automatically switched without delegation.
Note: For DVE integration, the following facts have to be determined in the
Setup menu:
•
Inputs for video and key signals (activates the function of the Loop
key)
•
Port assignment for DVE control (activates the function of the Transi-
tion Type key)