Grass Valley DD10 part 1 - Manual (Page 146)

3.5 Install menu Diamond digital DD10
140
The source mnemonic codes from upstream crossbars can be transferred to the
switcher using the IDENT XBAR protocol. For this purpose a corresponding control
cable must be provided in addition to the video cable between switcher E–box and
external crossbar (TVS, Mars, Venus) and the protocol for the relevant port must be
selected in the CONFIG EBOX menu. For further details please refer to Supple-
ment 3 TVS Interface.
The mnemonic code transfer is enabled with the IDENT XBAR# softkey in the
IDENT INPUT menu.
For this purpose the desired switcher input must be selected with the cursor. By
pressing the IDENT XBAR# softkey a ”#” appears in the Ident line of the selected
source. The desired output number of the external crossbar can be entered with the
numeric keypad.
Press the associated function key to return to the higher order INSTALL menu.
Pressing the associated function key permits an optional assignment of the input
signals to one or several keys of the source selection banks.
Pressing the associated function key the same sources are assigned on all levels.
The ME1 key bank is highligted with a running light. Selecting a key in this bank will
assign the signal source marked with the cursor in the menu to this position. This
status is indicated with a permanent light in the key. Press the key once more to
cancel the assignement.
Pressing the associated function key switches the menu between ON and OFF.
– ON: Display the “#” and “$” for inputs which get
their mnemonics using IDENT XBAR or EXTERN XBAR
– OFF: Display of these mnemonics
Press the associated function keys to move the cursor from field to field within the
entry mask, or from entry position to entry position within a field.
Press the associated function key to enter a blank in the source name entry.
Press the associated function key to delete the contents left of the current cursor
position.
IDENT
XBAR #
EXIT
ASSIGN
OFF
ASSIGN
ALL
SHOW
XBAR
BLANK
RUBOUT