Grass Valley DD10 part 1 - Manual (Page 76)

2.10 Wipe Panel Diamond digital DD10
70
Soft Soft adjusts the softness of the wipe edge.
The following adjustments are possible:
SOFT Adjustment of the softness width
If the Bord modifier has been also selected, the following adjustment
possibilities are additionally available:
WIDT Adjustment of the border width. The border width
can be adjusted by cw or ccw rotation.
When the border is adjusted with Opac transparent,
the sense of rotation of the border width adjustment
can determine the picture component to be seen in
the border. Clockwise rotation.
OPAC Adjustment of the border transparency
SYM Adjustment of the softness symmetry
Aspect Aspect adjusts the aspect ratio of the wipe pattern.
The following adjustments are possible:
H-ST Stretch in horizontal direction
V-ST Stretch in vertical direction
RATio By cw or ccw rotation, stretching can be made in
horizontal or vertical direction
Note: Please note that in the stretch mode, a linear piece is inserted into the
wipe pattern. In the ratio mode, the H:V aspect ratio is changed.
Also note the border widths in the stretch and ratio modes.
The settings of one wipe generator can be easily copied to the other one.
•
Press Input Corr; the key lamp lights.
•
Select with the delegation keys Wipe 1 or Wipe 2 the wipe generator you want
to copy.
•
Select with the other delegation key the wipe generator you want to copy the-
setting to. All settings will be transferred to the selected wipe generator.
When using the wipe generator for another function than for background transition,
the size of the pattern can be adjusted with the SIZE control.
When enabling control of a modifier, the SIZE function is disabled.
The SIZE function can be re-activated by
– disabling the respective modifier selection and
– pressing the delegation key for the respective wipe.
Copying
wipe settings
SIZE