Grass Valley DD10 part 1 - Manual (Page 13)

2.1 Source Selection Panel Diamond digital DD10
7
Input Corr The switcher is provided with an input correction function which enables individual
adjustments to color and brightness for each input. Thus, for instance, different
scenes with different light types can be matched to each other.
Adjustment:
•
Input Corr activates the function.
•
Select on the preset bus the desired input and hold the key down.
B R I C O N S A T B A L
•
The marked controls enable changing the following parameters:
BRI Brightness = setup
CON Contrast = gain
SAT Saturation = color saturation
BAL Balance = Pr-to-Pb relation
The adjustment can be checked on the preview monitor.
•
Fast rotation of the control for color saturation beyond minimum saturation,
switches over to monochrome reproduction (color is switched on by fast rota-
tion in opposite direction).
•
Releasing the source key automatically stores the values.
•
The default settings can be recalled at any time by simultaneously pressing the
Modif Reset and Preset Bus keys.
The Input Corr key is also used in copying settings and enabling menus. See the
corresponding sections in this operation manual.