Grass Valley DD10 part 1 - Manual (Page 23)

2.4 Transition Panel Diamond digital DD10
17
Transition Type The Transition Type panel permits selection of different transition types:
In order to select a transition type, activate the next transition key for the picture
component, then select a transition type using the transition type keys Add, DVE,
Mix, Wipe 1, and Wipe 2.
Transition Type
Add DVE Mix
Wipe
1
Wipe
2
The selected transition type is indicated in the display above the respective next
transition key.
Note: Please note that you can change the transition type only when the transi-
tion procedure is terminated, i.e. an automatic transition is completed or
the fader is moved to a limit.
Add Add provides a transition type which enables addition of the two background sig-
nals. In midposition of the fader, both signals are faded in at 100%. The output level
is internally limited to aprox. 108%.
Note: Please note that this transition type can be only used for background
transitions.
DVE DVE enables the user to recall DVE effects from the switcher and run them in the
same way as wipe effects.
The different effects have to be previously programmed on the respective DVE and
can then be recalled with the wipe selection keys on the Wipe panel when the
associated display shows DVE.
Further information and important notes about DVE control are contained in the
section DVE Panel.
Note: Please note that transition type DVE can be only effective for one picture
component.
Mix Mix selects a transition type which performs cross-fading between the picture sig-
nals selected with the next transition keys.