Grass Valley DD10 part 1 - Manual (Page 161)

3.5 Install menu Diamond digital DD10
155
In the REPL ASYNC = ON mode, the switcher monitors the signals to be keyed.
For asynchronous signals a hard cut is performed at the end of the transition.
The key memory can store a complete key adjustment for any input of the mixer.
These are the following parameters (marked in the figure with * ):
D
Key Type (Lin, Lum, Chr, Chr with FGD Fade)
D
Border (Shadow, Drop, Outline, ... )
D
Border Position, Border Opacity
D
Key Invert
D
Mask on, Mask Source (Box, Pattern, ...), Box Mask (right/left/top/bottom),
Mask Bus Clip/Gain
D
Fill Matte/Bus
D
Opacity
D
Clip, Gain
D
Chroma Key Color and Selectivity
D
Adjustments of Fill Matte and Border Matte
The following parameters are not stored:
D
Synthetic Key Sources (Mask Key, Pattern Key)
D
Key Over
D
Key PVW
D
Cursor/Auto
D
Source Key Bus / Coupl / Split Key
D
The source of the Mask Bus
Adjustment of the SETUP function KEY MEMORY = ON
The key parameters are stored into the key memory,
D
when another key source is selected on the key bus,
D
when the momentarily used key source is selected again on the key bus.
REPL
ASYNC
KEY
MEMORY
Condition
Storing into the
key memory