Grass Valley Aurora Playout v.8.1 - Manual (Page 65)

Description Setting
Marks a new In point for a clip. After trimming, the clip must be recued to apply
the new Mark In. Mark In
Marks a new Out point for a clip. After trimming, the clip must be recued to
apply the new Mark Out. Mark Out
Clears the trim marks of a clip. Clear
When a channel has focus, you can use the Out Cue key to activate Out Cue
Preview for that channel. This allows you to preview the end of a clip by playing
the last few seconds, followed by a recue to the beginning. The duration of the
preview can be configured by going to the Tools menu and selecting Options,
then changing the Out Cue Preview field on the Playback tab. Out Cue
These seven speeds correspond to whatever values are typed into the fields in
the Variable Speed Presets section of the X-keys Configuration dialog box.
When you press a VAR key, the clip plays at the preset speed for that key until
you press the Stop key. You can move the wheel to the left to access the negative
(backward) speeds, move the wheel to the right to access the positive (forward)
speeds. VAR -1; VAR 1;
VAR -3; VAR 3;
VAR -5; VAR 5;
VAR -7; VAR 7
Recues the clip. Recue
Plays or stops the clip. Play/Stop
Plays the clip without the accompanying graphics. This setting is only applicable
with graphics license of Aurora Playout. Play without
Graphics
Preset speeds that you can access by using the shuttle/varispeed wheel of the
controller or by using the VAR keys. You can modify these to your own settings. Variable speed
presets
Defining status colors
Aurora Playout uses color to show clip status.
20131223 Aurora Playout User Manual 65
Configuring Aurora Playout