Grass Valley Aurora Playout v.8.1 - Manual (Page 62)

Function Key Aurora Playout function
Channel 3 Channel 2 Channel 1
F9 F5 F1 Play/Stop Cued Clip
F10 F6 F2 Recue Current Clip
F11 F7 F3 Cue Previous Clip
F12 F8 F4 Cue Next Clip
To reassign a function; select the Function Key number, the channel it affects, and the command
you want the function key to perform.
Description Option Setting
Select the function key you want
to set. F1 through F12 Function Key
Select the channel on which the
function key will operate. Channel
Channel 1-6
Select the command the function
key will perform on the
specified channel. Command
Play/Stop
Recue
Cue Previous
Cue Next
This command is only enabled
when you have graphics license
with Aurora Playout. Play without Graphics
Select the Enable X-keys check
box to allow Aurora Playout to
use an X-keys Jog/Shuttle
controller. Click Configure to
define the function of each
X-key. On (checked) Enable X-keys
Off (unchecked)
Configuring the X-Keys Controller
You can use Aurora Playout with the X-keys Jog/Shuttle controller.
Many of the X-keys have been pre-configured on the Green layer; only the Toggle key has been
pre-configured on the Red layer. You can change the default layout or add new commands on the
unused keys.
62 Aurora Playout User Manual 20131223
Configuring Aurora Playout