Grass Valley Aurora Playout v.8.1 - Manual (Page 18)

Pre-installation planning checklist
Comment Task
Aurora Playout installation files can be
supplied via software CD, GrassValley
website, FTP site or other distribution
mechanisms Procure the Aurora Playout Software
The minimum and recommended system
specification requirements are listed in
Aurora Playout Release Notes Check hardware specification requirements
for Aurora Playout devices
— Install SiteConfig on a control point PC
within your network operation
The required version of Mircosoft .NET
software is provided within Grass Valley
Prerequisite files at your SiteConfig install
location if you need to install the application Check whether the correct Microsoft .NET
version is already installed on Aurora Playout
devices
ProductFrame Discovery Agent is provided
within DiscoveryAgent Setup folder at your
SiteConfig install location if you need to
install the service Check whether ProductFrame Discovery
Agent service is already installed on Aurora
Playout devices
Make the (*.cab) file accessible to the
SiteConfig control point PC Get Aurora Playout software installation
(*.cab) file
Next: Hardware installation checklist
Hardware installation checklist
Use items in this checklist as appropriate for the optional equipment you are installing for your
Aurora Playout.
Comment Task
GPI inputs and outputs can be connected
through PCI board or ethernet Connect GPI inputs and outputs depending
on your device type
Connect the RDU 1510 Under Monitor
Display
Install X-keys Jog/Shuttle Controller
Next: Network setup and installation checklist
18 Aurora Playout User Manual 20131223
Preparing for installation