beautypg.com

About siteconfig support on aurora playout devices, Discovering devices with siteconfig – Grass Valley Aurora Playout v.8.1 User Manual

Page 33

background image

5. If configuring Aurora Playout device that is also on the corporate LAN, repeat steps to configure

an interface for the corporate LAN, with settings as follows:

For corporate LAN network interface

Setting...

If using DHCP or external hosts file, select the unmanaged network that you
configured earlier.

Network

Select the IP address you plan to assign to the device.

IP Address

These settings are irrelevant, as SiteConfig does not manage this network.

Interface Name

Set to Default

...use Interface
Name/Aliases in
Host Files...

Aliases

For communication on some networks, a suffix, such as

mycorp.com

, must

be added to host names.

DNS Suffix

6. Click

OK

to save settings and close.

About SiteConfig support on Aurora Playout devices

Before SiteConfig can be used to discover or manage a device, the device must meet the following
requirements:

The device must be a Microsoft Windows operating system device.

The device must have Microsoft .NET version 3.5 installed, as reported in the Windows
Add/Remove Programs control panel.

The SiteConfig Discovery Agent service must be running on the device, as reported in the
Windows Services control panel.

For Aurora Playout devices shipped new from Grass Valley with software version 6.5 or higher,
these requirements are pre-installed. These requirements are pre-installed on recovery images for
these systems as well. Therefore, if you suspect a problem with these requirements, do not attempt
to install SiteConfig support requirements. If you must restore SiteConfig support requirements,
refer to the SiteConfig Migration Instructions for complete information on SiteConfig support
requirements.

Discovering devices with SiteConfig

Prerequisites for this task are as follows:

The Ethernet switch or switches that support the control network are configured and operational.
If multiple switches, ISLs are connected and trunks configured.

The PC that hosts SiteConfig is communicating on the control network.

There are no routers between the PC that hosts SiteConfig and the devices to be discovered.

20131223

Aurora Playout User Manual

33

Configuring the network