Grass Valley Aurora Edit LD v.6.0a Installation - Manual (Page 93)

Step 2: Install the Software for a Shared SmartBins
Aurora Edit Installation and Configuration Guide 93
Run the SmartBins Setup Tool for Shared SmartBins
If you are using SmartBins on a NAS or K2 system, you need to configure your
M-Series iVDR(s), Profile XP, or K2 Media Server to use SmartBins.
NOTE: You don’t need to configure SmartBins on an Open SAN
system.
To configure the SmartBins Service on a NAS or K2 system:
1. Go to Start | Programs | Aurora 6.0 | SmartBins Setup Tool .
The SmartBins Setup Tool opens.
Specify the shared drive(s) for use
with the shared storage Leave set at the default location and click Next .
Ready to Install Click Next to begin the installation.
Installation Complete Click OK to close the installation program. The
workstation prompts you to reboot so the new
settings take effect.
On this screen... Do this...